Flat Roofs are especially susceptible to leaks as they usually taper off like pitched roofs. So, water tends to accumulate and sit in one place resulting in leakages. If you see water spots on your ceiling at your house, contact a roofing company immediately for emergency flat roof repair in Alpharetta. In the meantime, have this list of tips in mind so you can take care of a leaky roof as soon as possible.
– Make sure that there are no damp areas around your house. Damp spots may cause leaks if water collects there and becomes saturated. Check under sinks and showers to ensure that the area is well dry.
– You should check the condition of flashing and seams between the tar and the flat roof repair patch. Look for cracks in flashing or seams, which will allow water to permeate through the patch. You can do a self-etching repair on damaged tar and the seams by pulling up on both ends and placing the flat roof repair kit on top of the tar and then pulling the entire patch up, making sure the seams are facing down. Press the tar into place and then scrape off excess tar to finish the repair.
– Do not use DIY repairs for flat roofs. Flat roofs are a different type of structure and require a professional Flat Roof Repair service. DIY Flat Roof Repair methods will weaken the tar and allow it to separate from the backing. The seams of pitched roofs also tend to be weaker and could allow leaks to seep through. Thus, if you have Flat Roof Repair in Alpharetta, seek the help of a professional roofing contractor to address your needs.
– If the Flat Roof has relatively new repaired, there is a slim chance that there may be a leak. For example, replacing an asphalt Flat Roof with rubber tiles will make a leak potential, but only if the replacement Rubber Tiles have just been applied. Otherwise, the seams may be very weak and allow water to seep through. A professional roofer will be able to check for leaks and resolve them before they become a serious issue.
In summary, flat roofs need careful attention when doing the repairs. Flat Roofs is typically much more complicated than pitched roofs and should be done by trained professionals. Improper installation can compromise the roof’s integrity and lead to leaks. Moreover, leaks can become a safety hazard, especially if they occur near flushing areas, where there is already inadequate drainage.